SIMATIC ET 200SP, Analog input module, AI 8XI 2-/4-wire Basic, suitable for BU type A0, A1, Color code CC01, Module diagnostics, 16 bit

Category: SIEMENS Simatic Control Systems

Specifications

SKU

6ES7134-6GF00-0AA1

analog input module ET 200SP 6ES7134-6GF00-0AA1 AI 8XI 2-/4-Wire Basic

Details

General information
Product type designation		AI 8xI 2-/4-wire BA
HW functional status		FS23 or higher
Firmware version		V2.0.0
● FW update possible		Yes
usable BaseUnits		BU type A0, A1
Color code for module-specific color identification plate		CC01
Product function
● I&M data		Yes; I&M0 to I&M3
● Isochronous mode		No
● Measuring range scalable		No
Engineering with
● STEP 7 TIA Portal configurable/integrated from version		TIA Portal V21
● STEP 7 configurable/integrated from version		V5.7 SP3
● PROFIBUS from GSD version/GSD revision		One GSD file each, Revision 3 and 5 and higher
● PROFINET from GSD version/GSD revision		GSDML V2.45
Operating mode
● Oversampling		No
● MSI		No
CiR - Configuration in RUN
Reparameterization possible in RUN		No
Calibration possible in RUN		No
Supply voltage
Rated value (DC)		24 V
permissible range, lower limit (DC)		19.2 V
permissible range, upper limit (DC)		28.8 V
Reverse polarity protection		Yes
Input current
Current consumption (rated value)		25 mA; rated voltage, all channels active, no load
Current consumption, max.		725 mA; worst case voltage, all channels active, max. load, no derating
Encoder supply
24 V encoder supply
● 24 V		Yes
● Short-circuit protection		Yes
● Output current, max.		0.7 A; total current of all encoders/channels
Power loss
Power loss, typ.		0.7 W; rated voltage, 50 % active channels, 50 % of range
Address area
Address space per module
● Address space per module, max.		16 byte
Hardware configuration
Automatic encoding		Yes
● Mechanical coding element		Yes
● Type of mechanical coding element		Type A
Selection of BaseUnit for connection variants
● 1-wire connection		BU type A0, A1
● 2-wire connection		BU type A0, A1
● 4-wire connection		BU type A0, A1 + potential distributor module
Analog inputs
Number of analog inputs		8; Single-ended
● For current measurement		8
permissible input current for current input (destruction limit), max.		50 mA
Cycle time (all channels), min.		1 ms; per channel
Input ranges (rated values), currents
● 0 to 20 mA		Yes
— Input resistance (0 to 20 mA)		100 Ω; 15 bit
● -20 mA to +20 mA		Yes
— Input resistance (-20 mA to +20 mA)		100 Ω; 16 bit incl. sign
● 4 mA to 20 mA		Yes
— Input resistance (4 mA to 20 mA)		100 Ω; 15 bit
Cable length
● shielded, max.		200 m
Analog value generation for the inputs
Integration and conversion time/resolution per channel
● Resolution with overrange (bit including sign), max.		16 bit
● Integration time, parameterizable		Yes
● Interference voltage suppression for interference frequency f1 in Hz		16.67 / 50 / 60 / 4 800 (16.67 / 50 / 60)
● Conversion time (per channel)		180 / 60 / 50 / 0.625 (67.5 / 22.5 / 18.75) ms
Smoothing of measured values
● Number of smoothing levels		4
● parameterizable		Yes
● Step: None		Yes
● Step: low		Yes; 4x smoothing
● Step: Medium		Yes; 8x smoothing
● Step: High		Yes; 16x smoothing
Encoder
Connection of signal encoders
● for voltage measurement		No
● for current measurement as 2-wire transducer		Yes
— Burden of 2-wire transmitter, max.		650 Ω
● for current measurement as 4-wire transducer		Yes
Errors/accuracies
Linearity error (relative to input range), (+/-)		0.01 %
Temperature error (relative to input range), (+/-)		0.005 %/K
Crosstalk between the inputs, min.		50 dB
Repeat accuracy in steady state at 25 °C (relative to input range), (+/-)		0.05 %
Operational error limit in overall temperature range
● Current, relative to input range, (+/-)		0.5 %
Basic error limit (operational limit at 25 °C)
● Current, relative to input range, (+/-)		0.3 %
Interference voltage suppression for f = n x (f1 +/- 1 %), f1 = interference frequency
● Series mode interference (peak value of interference < rated value of input range), min.		70 dB; With conversion time 67.5 / 22.5 / 18.75 ms: 40 dB
Interrupts/diagnostics/status information
Diagnostics function		Yes
Alarms
● Diagnostic alarm		Yes
● Limit value alarm		No
Diagnoses
● Monitoring the supply voltage		Yes
● Wire-break		Yes; at 4 to 20 mA
● Short-circuit		Yes; Sensor supply to M; module by module
● Group error		Yes
● Overflow/underflow		Yes; Module-wise
Diagnostics indication LED
● Monitoring of the supply voltage (PWR-LED)		Yes; green LED
● Channel status display		Yes; green LED
● for channel diagnostics		No
● for module diagnostics		Yes; green/red DIAG LED
Potential separation
Potential separation channels
● between the channels		No
● between the channels and backplane bus		Yes
● between the channels and the power supply of the electronics		No
Isolation
Isolation tested with		707 V DC (type test)
Standards, approvals, certificates
Ecological footprint
● environmental product declaration		Yes
Global warming potential
— global warming potential, (total) [CO2 eq]		9.32 kg
— global warming potential, (during production) [CO2 eq]		4.97 kg
— global warming potential, (during operation) [CO2 eq]		4.79 kg
— global warming potential, (after end of life cycle) [CO2 eq]		-0.449 kg
product functions / security / header
signed firmware update		Yes; firmware V2.0.0 or higher
safely removing data		Yes; firmware V2.0.0 or higher
data integrity		Yes; firmware V2.0.0 or higher
Ambient conditions
Ambient temperature during operation
● horizontal installation, min.		-30 °C; < 0 °C as of FS04
● horizontal installation, max.		60 °C
● vertical installation, min.		-30 °C; < 0 °C as of FS04
● vertical installation, max.		50 °C
Altitude during operation relating to sea level
● Installation altitude above sea level, max.		5 000 m; restrictions for installation altitudes > 2 000 m, see ET 200SP system manual
Dimensions
Width		15 mm
Height		73 mm
Depth		58 mm
Weights
Weight, approx.		31 g

View more about SIMATIC ET 200SP, Analog input module, AI 8XI 2-/4-wire Basic, suitable for BU type A0, A1, Color code CC01, Module diagnostics, 16 bit on main site